Description

All New ATAC Advanced Thermal Acoustic Coating – A revolution in automotive interior comfort! A one-step solution to control both heat and sound.

ATAC coating is designed to transform the interior of your vehicle into an oasis of comfort. Say goodbye to the discomfort of excessive heat and annoying noise, and say hello to a serene, cool, and quiet ride!

• A spray-on, roll/brush-on, 2-IN-1 SOUND AND HEAT BARRIER for automobile interiors that saves time & money
• Unique Hi-Tech ceramic micro-sphere technology dampens noise & vibration while reflecting heat up to 375°F
• Water-based coating cleans up easily and covers approximately 75sqft
• Non-toxic and water soluble

Upgrade your driving experience with ATAC Advanced Thermal Acoustic Coating and discover a new world of comfort and quiet. It’s time to silence the noise, beat the heat, and elevate your vehicle with ATAC.

HOW DO I MIX ATAC?

Gently mix by hand using a paint mixing stick. Do not shake to mix. Aggressive mixing can damage the microspheres. A few minutes of stirring is all that’s needed.

DOES THE SURFACE NEED ANY PREPARATION BEFORE APPLICATION OF ATAC?

Make sure the surface you are applying the ATAC coating to is prepped properly. Clean and dry, free from any contaminants. Take care of any rusted areas, do not apply over rust. You can treat the rust with a rust converter or remove it completely. Use a primer over any bare metal or rust treated areas – a red oxide primer works well. Always test the ATAC coating over any primer you are going to use. Let it dry for 48 hours and see if any lifting or reaction occurs. Lightly sand any glossy areas, prep just like you would when applying any automotive paint, making sure to clean thoroughly afterwards. The use of a shop vacuum and tack cloth is recommended. Not having a clean, dry surface will inhibit the ATAC from adhering properly.